2. Click Up g rad e.
NOTE: When the Enable IQ Auto update option is enabled in the IQ Status dialog box, IQ module
firmware is automatically upgraded when the switch firmware is upgraded or when a new IQ module is
discovered by the switch after a firmware upgrade. IQmodules that have already been discovered but
which are not attached to the switch during the firmware upgrade must be upgraded manually.
3. In the IQ Up g rad e dialog box, click O K to initiate the upgrade and return to the IQ Statu s
dialog box.
To return an IQ module to factory default status:
1. Click IQ in the V ersion dialog box.
2. Select an IQ module, then click Decom m ission .
3. Click O K to restore factory defaults. The IQ module goes offline briefly and returns.
- or-
Click X or press Escap e to cancel the operation.
4. Click X to close the IQ S elect dialog box.
Vertiv | Avocent® AutoView™ 2108/2216/3108/3216 Switch Installer/User Guide | 25
To Next Page
Loading...
Need help?
General