Avonic CM93-IP - Audio

Focus Mode Commands
Zoom and focus
Code {"SysCtrl":{"PtzCtrl":{"nChanel":0,"szPtzCmd":"zoomdec_start","byValue":0}}}
Command Setting Function Command
nChanel 0
byValue 0
szPtzCmd
Zoom add start zoomadd_start
Zoom add stop zoomadd_stop
Zoom decrease stop zoomdec_start
Zoom decrease stop zoomdec_stop
Focus add start focusadd_start
Focus add stop focusadd_stop
Focus decrease start focusdec_start
Focus decrease stop focusdec_stop
Preset
Preset Commands
Code {"SysCtrl":{"PtzCtrl":{"nChanel":0,"szPtzCmd":"preset_set","byValue":0}}}
Command Setting Function Command
nChanel 0s
ByValue 0, 254
szPtzCmd
Set preset preset_set
Call preset preset_call
Clean preset preset_clean
Audio
Audio Configure
Get audio configure
Code {"GetEnv":{"Audio":{}}}
Set audio configure
Code {"SetEnv":{"Audio":{"nSampleBits":16,"nAudioSmstMask":
[33554888,33554888,33554433],"bEnable":0,"nInpVolume":4,"nBitRate":64,"nAEncType":7,"byAudioCodecList":
[6,7,2],"nSampleRate":44100,"nAudioDelay":0,"nChannel":1}}}
Function Code Command Setting
Enable {"SetEnv":{"Audio":{"bEnable":1}}} bEnable 0: off
1: on
Encode
Type
{"SetEnv":{"Audio":{"nAEncType":7}}} nAEncType 6: Mp3AAC
7: G.711A
2:
Sample
Rate
{"SetEnv":{"Audio":
{"nSampleRate":32000}}}
nSampleRate (Only
supporting these sample
rates and gy11a can only
be 8000.)
16000
32000
44100
48000
Sample Bits {"SetEnv":{"Audio":{"nSampleBits":16}}} nSampleBits 16
75