AVS Electronics CAPTURE 8 - Page 45

- 45 -
Key num. #
1 (1 . . 8)
Operation Type:
Arm. ON Part.
Partition #
1 (1 . . 9 )
BIP
ENT 
Emerg. Key
NO
1 2
3 4
5
BEEP: In this menu, it is possible to assign a specic function to each channel of the remote control.
- Key number #: select the number between 1 and 8 of the channel to be programmed
- None: no function associated
- Activates/Deactivates OC?: the key is associated to the activation/deactivation of the O.C. output.
It must be programmed as “Cat. User”.
- Switches OC: varies the state of the O.C. output; activates it if disarmed, deactivates it if armed. It
must be programmed as “Cat. User”.
- Arming ON /HOME /AREA /PERI /Disarming - SECT: ?: the key is associated to the arming/disar-
ming of one or more Partitions; if Partition 65 (sixty-ve) is set, the command works on all Partitions
associated to the user
- Despatch: Panic/Doctor/Fire: the key is associated to the panic/doctor/re signal
- Macro: the key is associated to the arming MACRO function which number is herein programmed
Emergency Channel:
Note: if the emergency option is enabled (YES), the emergency code function will also be activated
simultaneously with the operation associated with the button.
Keys functioning:
Keys from 1 to 4 directly activate the function to which they are associated, the second group of
keys is activated with the simultaneous pressing of key 5 (the middle one) and subsequently of one of
the other keys.
Press (CLR) to vary
Press () or () to move
Enter the key to be set
Press (ENT) to conrm
PROGRAMMING OF THE CHANNELS ON THE REMOTE CONTROL
Select the Key Function from 1 to 5+4 according to the
conversion table “Channels - Keys”
Channels
Keys to
press
5 • 5+1
6 • 5+2
7 • 5+3
8 • 5+4
Channels
Keys to
press
1 • 1
2 • 2
3 • 3
4 • 4
User Proles
Label
Label: it is possible to associate a description of 16 alphanumerical digits for every User Prole;
Press (CLR) to vary
Writing keys::
(1)abc1 (2)def2 (3)ghi3 (4)jkl4 (5)mno5 (6)pqr6 (7)stu7 (8)vwx8 (9)yz. (0)_’0
Press arrows () and () to position the cursor
Press () or () to move
Press (ENT) to conrm
Press (ESC) to go back
to following
page
from previus
page