EasyManua.ls Logo

AVS 9000 - Register 1

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Register 1
Vehicle set up: Close all doors/bonnet/boot THEN turn the ignition
on. (Remote* = press bottom button on remote this many times)
Feature
Remote*
Factory
Description
Arming chirp
1
ON
1 chirp on arm.
Disarm chirp
2
ON
2 chirps on disarm.
Auxiliary
sensor
3
ON
Activate any additional sensors
fitted.
Shock sensor
4
ON
Activate shock sensor.
Passive
arming
5
OFF
System arms automatically 60
seconds after exit. The doors
will not lock.
Auto re-
arm/re-lock
6
OFF
If disarmed and a door not
opened within 60 seconds, the
alarm will re-arm and re-lock.
Door lock
pulse on
alarm trigger
7
OFF
Sends a door lock pulse on
alarm trigger. This can help
frustrate a thief’s attempt to
enter the vehicle (a thief picks
the door lock which triggers the
alarm and the doors
immediately re-lock).
Not used
8
OFF
Shock sensor
adjustment
9
6
SELECT
the level
required.
Press remote 9 times to enter
mode then turn ignition to OFF.
There are 8 levels of adjustment
(factory setting 6).
Pressing the remote once will
increase the sensitivity by 1
level i.e. to 7. The LED will flash
7 times to confirm level 7.
Pressing the remote again will
increase the sensitivity to level
8 (max).
Pressing the remote again will
return the adjustment to level 1
(least sensitive).
Once the level is set, turn the
ignition ON to exit this mode.

Related product manuals