EasyManua.ls Logo

AVS 9000 - SMS Commands Glossary (Commands & Replies); SMS Commands and Replies

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SMS commands and replies
Each command below is listed with the symbol > referring to SMS
commands to send to the system and the symbol < referring to
reply SMS from the AVS 9000.
> ARM or A (i.e. 000000ARM or 000000A for short)
< ALARM ARMED or
< ALARM ARMED. DOOR AJAR WARNING! - other trigger
responses include BOOT WARNING!, BONNET WARNING!, AUX
WARNING! or
< ALARM ALREADY ARMED or
< ALARM UNABLE TO ARM. IGNITION ON!
> DISARM or D
< ALARM DISARMED or
< ALARM ALREADY DISARMED
> PANIC
< PANIC ALERT!
NOTE: The AVS 9000 will not send PANIC ALERT! when the
ignition is on.
> ONOUT1 - SMS are the same for outputs 1, 2 and 3. Only the
output number changes.
< OUTPUT1 TURNED ON
> OFFOUT1 - SMS are the same for outputs 1, 2 and 3. Only the
output number changes.
< OUTPUT1 TURNED OFF
> READPHONE – lists all stored mobile phone numbers (up to five)
and their location. Location 1 is the mobile number that the system
will call if there is no response via SMS or remote to an alarm
condition within one minute.
< PHONE NUMBERS. 1:XXXX 2:XXXXX 3:XXXXX 4:XXXX
5:XXXXX

Related product manuals