> ERASEPHONEX – erases the mobile phone number stored at
location X (locations 1-5) in the system’s memory. System puts
NOT USED for that location in reply SMS eg. ERASEPHONE3
(erase location 3 mobile phone number).
< PHONE NUMBERS. 1: XXXXX 2: XXXX 3: NOT USED 4:
XXXX 5:XXXX
> WRITEPHONEYXXXX – stores the mobile phone number XXXX
in location Y (locations 1-5) in the system’s memory eg.
WRITEPHONE3021555333.
< PHONE NUMBERS 1: XXXX 2: XXXX 3: 021555333 4: XXXX
5: XXXX or
< FAILED TO UPDATE PHONE NUMBER, MEMORY LOCATION
ERROR - if location 0,6,7,8,9 was entered as the location in error.
> IDXXXX – changes the ID that the AVS 9000 sends at the front
of all SMS.
< XXXX ID CHANGE PASSED. eg > IDXBU-458 < XBU-458. ID
CHANGE PASSED.
To change your secure operation PIN code if you have forgotten
the code:
> NEWPINXXXXXX (confirmation then required by pressing the
bottom remote button within the time it takes the siren to chirp
and the indicators to flash nine times).
< NEW PIN NUMBER XXXXXX – the system will confirm the new
PIN or
< REMOTE CONFIRMATION NOT RECEIVED – no confirmation
received
< PIN CHANGE FAIL – a valid PIN was not given. Check PIN and
re-send - valid characters are numbers 0-9 and letters a-Z (not case
sensitive). PIN must be 6-digits long.
To change your secure operation PIN code if you know the code:
> XXXXXXPINYYYYYY (where XXXXXX is the existing PIN and
YYYYYYY the new PIN code)
To Next Page
Loading...
