Page 1 of 4
Clean Towel Masking TapeCar Wash Supplies
Aeroskin
™
and Aeroskin II
™
Installation Instructions
I - Sheet Number ASK01 Rev.E
Important Safety Information
• CAUTION - Before driving, ensure that the Aeroskin is properly secured to vehicle.
• Do not use automatic “brush-style” car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
NOTE: Actual product may vary from illustration.
Aeroskin
Contents
Alcohol
Pad x2
Surface Prep
Pad x1
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Prior to installation, wash the hood of vehicle and
dry with a clean cloth.
Lay Aeroskin in place on vehicle and mask off the
surrounding areas with tape.
1
2
To Next Page
Need help?
General
