Page 1 of 2
Installation Instructions
I - Sheet Number BF118 Rev.B
NOTE: Actual product may vary from illustration.
Contents
Bugector
®
- Bugector II
®
- Carector
®
- Chrome Hood Shield
™
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Clean TowelCar Wash Supplies
Installation Steps
NOTE: Actual application may vary slightly from illustrations.
Open hood.
Locate (6) square holes on underside of hood.
Phillips Screwdriver Tape
Bump Ons x4Hood shield Hood Insert x6
(39-4150)
Washer x6
(98022)
Screws x6
(98023)
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic “brush-style” car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
1
2
To Next Page
Need help?
General
