Installation Instructions
Ventvisor® Deflector
Page 1 of 4
Contents - 2 Piece Set
Front Driver
Side Visor
Alcohol
Pad x2
Front Passenger
Side Visor
Contents - 4 Piece Set
Alcohol Pad x4
I - Sheet Number VV53 Rev.A
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visors are properly secured to vehicle.
• Do not use automatic “brush-style” car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
• When using Surface Prep, avoid contact with skin. Use in well ventilated area. If contact is made with
material, flush area with large amounts of water. If irritation persists, get immediate medical
attention. USE PREP ON RUBBER ONLY
Preparation Before Painting / Installation
NOTE: Actual product may vary from illustration.
Tools Required
Car Wash Supplies Clean Towel
Surface Prep
Surface Prep
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle to remove any debris and/or dirt.
• Dry with a clean towel.
Front Passenger
Side Visor
Rear Driver
Side Visor
Rear Passenger
Side Visor
Front Driver
Side Visor
To Next Page
Need help?
General
