Avtech avc-798 - System Sources Reallocation (for 4 CH Models Only)

BASIC OPERATION
18
4.5 System Sources Reallocation (For 4CH Models Only)
Go to “QUICK START”  “GENERAL”, and select “PRIORITY” to reallocate the system
sources to live display and record.
There are three options for this function: RECORD FIRST / DISPLAY FIRST.
QUICK START
GENERAL
CHANNEL TITLE ON
TIME SETUP
EVENT STATUS ON
DATE DISPLAY ON
DCCS DISPLAY ON
MOUSE SENSITIVITY - ׀ ׀ ׀ ׀ ׀ ׀ ׀ ׀ ׀ +
PRIORITY (For 4CH Models Only) RECORD FIRST
RECORD CONFIG SETUP
EXIT
RECORD FIRST: When this option is selected, Full D1 at real-time record on all
channels is available, and the VGA output resolution is fixed to
1024 x 768.
DISPLAY FIRST: When this option is selected, three VGA output resolutions will be
available to choose (1024 x 768 / 1280 x 1024 / 1600 x 1200), but
Full D1 real-time recording on all channels will not be available.