BASIC OPERATION
18
The default video output setting is “AUTO”, meaning the DVR will automatically detect
the video output source. When “VGA” and “MONITOR” are both connected, the default
monitor output is VGA.
To change the video output setting manually:
To force the video output via “MONITOR”, press the left key ◄ on the DVR front panel at
DVR power-on.
To force the video output via “VGA”, press the right key ► on the DVR front panel at DVR
power-on.
The setting is changed when you hear a short beep sound.
OR:
When the DVR is powered on and initialized, right-click to show the main menu, and
select “ADVANCE CONFIG” “DISPLAY” “DISPLAY OUTPUT PATH”.
Select “VGA” to switch to the connected LCD monitor, or “COMPOSITE” to switch to the
connected CRT monitor. The DVR will then reboot for the change to take effect.
ADVANCE CONFIG
CAMERA
DE-INTERLACE
(For Selected Models Only) OFF
DETECTION
FULL SCREEN DURATION 03
ALERT
QUAD SCREEN DURATION
(For Selected Models Only) 03
NETWORK
DISPLAY COVERT ON
SNTP
HDD DISPLAY MODE HDD SIZE
DISPLAY
DISPLAY OUTPUT PATH AUTO
RECORD
ALPHA BLENDING 200
REMOTE
EXIT
To Next Page
Loading...
Need help?
General
