awave DSP6V4 - Stand Installation Reference; Channel Stand Alone Treble Mode; Way Crossover Treble Mode; Remote Introduction

PRODUCT BRIEF INTRODUCTION
[ 15 ]
PRODUCT BRIEF INTRODUCTION
[ 16 ]
14. X-OVER AND EQ CHARTS.
15. EQ SETTING.
7.STAND INSTALLATION REFERENCE
1.Red lines and slopes will change accordingly when
2.EQ all frequency points can be move left or right.For 20Hz-20KHz can be any Regulation.
Q volue=1-12.
HP/LP of crossover and EQ are modified.
7.1 6 CHANNEL STAND ALONE TREBLE MODE
Ground
Subwoofer/CH7+CH8 To Subwoofer
8.REMOTE INTRODUCTION
7.2 2 WAY CROSSOVER TREBLE MODE
Subwoofer/CH7+CH8 To Subwoofer
Ground