AWS HX-502 - Getting Started; Basic Weighing

4
Getting Started
7. BASIC WEIGHING FUNCTIONS
Preparation
− Turn the scale on: Press (ON/OFF) Key.
Warm up time:
I To ensure proper operation, allow the scale to warm up according to the
warm-up times listed in the chart below:
Model Warm-up Time
HX-Series 60 seconds
INSTANCE
Basic Weighing (after warming up)
Action Description
Press [Zero]
1. Zero the scale.
2. If using a container or tray, place it on the platform.
( example : 20g )
Press [TARE]
3. Press the Tare key to subtract the weight of the container or tray.
4. Place the sample in the container.
( example : 100g )
Calibration / Adjustment
I Note: Calibration and adjustment are performed at the factory. However,
due to dierences in local acceleration of gravity, you should calibrate
your scale at the location of use after receiving it. Calibration should be
performed:
− When you rst receive the scale
− If the scale is moved
− As part of regular scale mainenance