AWS MB-100 - Error Codes; OUTZ Error; O-Ld Error (Overload); Lo Error (Low Battery)

X. Error Codes
1. OUTZ - Zero point has drifted out of the acceptable
range. Try to perform a calibration adjustment. If the
problem persists, the load cell may be permanently
damaged due to overloading.
2. O-Ld - Overload. The maximum capacity has
been exceeded. Remove the extra weight to avoid
permanently damaging the load cell.
3. Lo - Batteries are low. Replace the batteries.
XI. Specications
MB-100 MB-650
Max. Capacity 100g 650g
Readability 0.01g 0.1g
Min. Weight 0.03g 0.2g
Power One“CR2032”LithiumBattery
Dimensions 1.4 x 2.9 x 0.5 in.
Platform Dimensions 1.4 x 1.8 in.
Warranty 10 Year Limited Warranty
XII. Capacity/Readability Charts
MB-100 MB-650
100g x 0.01g
3.527ozx0.001oz
3.215oztx0.001ozt
64.30dwt x 0.01dwt
500ct x 0.05ct
1543.2gn x 0.2gn
650g x 0.1g
22.92ozx0.01oz
20.89oztx0.01ozt
418.0dwt x 0.1dwt
3250ct x 0.5ct
10031gn x 2gn