AWS Storage Gateway User Guide
Performing Tasks on the VM Local Console (File Gateway)
3. On the Network Configuration menu, choose one of the following options.
To Do This
Get information about your network adapter Enter 1.
A list of adapter names appears, and you are
prompted to enter an adapter name—for
example, eth0. If the adapter you specify is in use,
the following information about the adapter is
displayed:
• Media access control (MAC) address
• IP address
• Netmask
• Gateway IP address
• DHCP enabled status
You use the same adapter name when you
configure a static IP address (option 3) as when
you set your gateway's default route adapter
(option 5).
API Version 2013-06-30
233
To Next Page
Loading...