AWS Storage Gateway - Page 365

AWS Storage Gateway User Guide
Working with VTL Devices
with tape gateways. This table includes the medium changer type recommended for each backup
application.
Backup Application Medium Changer Type
Arcserve Backup AWS-Gateway-VTL
Bacula Enterprise V10.x AWS-Gateway-VTL or STK-L700
Commvault V11 STK-L700
Dell EMC NetWorker V8.x or V9.x AWS-Gateway-VTL
IBM Spectrum Protect v7.x IBM-03584L32-0402
Micro Focus (HPE) Data Protector 9.x AWS-Gateway-VTL
Microsoft System Center 2012 R2 or 2016 Data
Protection Manager
STK-L700
NovaStor DataCenter/Network 6.4 or 7.1 STK-L700
Quest NetVault Backup 10.0 or 11.x or 12.x STK-L700
Veeam Backup & Replication V7 or V8 STK-L700
Veeam Backup & Replication V9 Update 2 or
later
AWS-Gateway-VTL
Veritas Backup Exec 2014 or 15 or 16 or 20.x AWS-Gateway-VTL
Veritas Backup Exec 2012
Note
Veritas has ended support for Backup
Exec 2012. For more information, see
End of Support for Prior Backup Exec
Versions.
STK-L700
Veritas NetBackup Version 7.x or 8.x AWS-Gateway-VTL
Important
We highly recommend that you choose the medium changer that's listed for your backup
application. Other medium changers might not function properly. You can choose a different
medium changer after the gateway is activated. For more information, see Selecting a
Medium Changer After Gateway Activation (p. 358).
For tape drives, Storage Gateway works with the following:
• IBM-ULT3580-TD5—This device emulation is provided with the gateway.
Selecting a Medium Changer After Gateway Activation
After your gateway is activated, you can choose to select a different medium changer type.
Important
If your tape gateway uses the Symantec Backup Exec 2014 or NetBackup 7.x backup software,
you must select the AWS-Gateway-VTL device type. For more information on how to change the
API Version 2013-06-30
358