26 OFFLINE WOLF DATA
This part of the software displays all the measurements recorded by the Wolf Network also in conjunction with a Wolf
Master device located at the head of the network. The Wolf Master sends, offline (i.e. without the presence of Left +
Right Audio on the transmission chain), a series of audio tones at various frequencies and levels that, once received by
the Wolf Network devices located at the end of the transmission chain, i.e. located on the transmitter site, allow the user
to determine quality of the entire audio transmission and distribution chain.
This part of the software only works with the Wolf Master, as it performs comparative tests, i.e. since the quality of
various audio signals transmitted from the head of the network is known, the quality thereof at the end of the same
network can also be known. By comparing the signals sent with those received, it is therefore possible to establish the
audio transit quality.
To Next Page
Loading...