- 9 -
HARDWARE INSTALLATION FOR WINDOWS
LOADING USB DRIVERS
1. Plug the verifier into any available USB port directly on the
computer.
2. When prompted to install the drivers, make sure the CD is inserted
into the CD driver and follow the instructions.
After installation is completed you will find the “Axicon Verifier”
directory in “Start Menu/Programs” and a shortcut to the program on
your desktop.
• Double clicking the Axicon Verifier shortcut icon will now start the
software.
• Two windows will open: the Command window and the Summary
window.
• The LED array of your CCD should now be lit and the text in the
bottom right hand corner of the Command window should read “Ready
to scan”. If not, refer to the troubleshooting section of the manual on
the CD.
To Next Page
Loading...