- 5 -
INTRODUCTION
Thank you for purchasing an Axicon Verifier. This short guide will enable
you to get started with your Axicon Verifier quickly and easily. A full
manual is available in electronic form on the software CD
The Axicon Verifier is designed to work with any PC running a version of
Microsoft Windows currently supported by Microsoft (some earlier
versions may also be supported – see notes) and with any Apple Macintosh
computer running Mac OS X version 10.4 or higher (up to but not including
Lion and Mountain Lion).
IMPORTANT INFORMATION
1. Your Axicon verifier is a piece of high precision quality control
equipment and should be handled with due care.
2. Please retain the plastic transit case. It will protect the equipment in
transit.
3. Only use power and data cables supplied by Axicon. Use of non-
approved accessories will invalidate the warranty.
4. If the verifier is dropped (or subjected to similar misuse) the accuracy
of the results may be affected. The unit should be returned to Axicon
immediately for servicing.
5. Axicon recommends that the verifier is factory recalibrated annually.
The unit should be returned to Axicon or to your approved Axicon
reseller for this check to be performed.
6. As the owner of an Axicon Verifier you are entitled to free software
updates for life. The latest copy of the software is always posted on
our website (www.axicon.com).
7. Subject to the terms of the license you are permitted to make
additional copies of the Axicon Verifier software.
To Next Page
Loading...