- 31 -
VERIFIER SERVICING AND FACTORY RECALIBRATION
Axicon equipment is designed and manufactured to the highest
specifications and complies with all relevant international standards.
Barcode verifiers are precision measuring and testing devices. It is normal
practice for all inspection, measuring and test equipment to be regularly
checked and recalibrated and a precision quality control instrument such
as a barcode verifier is no exception.
To ensure that your equipment is working correctly, we recommend that
you return your verifier annually for servicing / factory recalibration
(please note that a factory recalibration is different to the user
calibration procedure explained on page 29 of this booklet). Axicon Auto
ID Ltd offers a high quality verifier factory recalibration service to ensure
that your Axicon verification equipment provides only the best results and
complies fully with GS1 standards. We recommend that this service is
carried out annually on verifiers aged 12 months or older. Please contact
us (or your reseller) for details of costs.
There is a silver sticker on your verifier which will tell you when it was
last factory recalibrated.
Should you decide not to take advantage of this service, we must remind
you that Axicon Auto ID Ltd is unable to accept any responsibility for non-
compliance to the appropriate GS1 STANDARDS once your verifier has
exceeded the standard guarantee period provided on date of purchase.
To Next Page
Loading...