- 3 -
Conformance Certification
We Axicon Auto ID Ltd
of Church Road, Weston on the Green, Oxfordshire, OX25 3QP, UK
Declare under our sole responsibility that the product has been designed and
manufactured at our address in the year 2014 to perform verification of barcode
quality in accordance with the following standards:
ANSI X3. 182 ISO/IEC 15416 ISO/IEC 15420 ISO/IEC 16388
ISO/IEC 16390 ISO/IEC 15417 ISO/IEC 24724
We further declare that the verifier has been designed and manufactured to ensure
conformance to Primary Reference Test Symbols available from N.I.S.T. and
Traceable Reflectance Standards available from N.P.L. in accordance with ISO/IEC
15426-1.
Tolerances: Decodability: ±8%
Rmin: ±3%
Rmax: ±5%
Defect: ±8%
Modulation: ±12%
We also certify that this equipment conforms to the following standards:-
Barcoding: ISO/IEC 15426-1 VERIFIER CONFORMANCE STANDARD
European Safety EN 60950
Electromagnetic Compatibility EN 55022 &
EN 55024
We also certify that the standards EN 60825 is not applicable to the product.
This equipment meets the requirements of the directives 89/336/EEC (Electromagnetic
Compatibility), 73/23/EEC (Low Voltage), based on our own relevant test reports.
Axicon Auto ID Ltd also certifies that this equipment, when used in conjunction with the
latest verifier software has all of the features required to meet the 21CFR Part 11 standard.
Church Road, Weston on the Green, Oxfordshire, OX25 3
P, UK
Tel: +44
0
1869 351155 / Fax: +44
0
1869 351205 /
To Next Page
Loading...