What to do if my AXIL rt0420t2 TV Receiver remote control is not responding?
If your AXIL TV Receiver remote control isn't responding, the battery may be exhausted, so try changing the battery. Also, make sure the remote control is facing the Set Top Box and is close enough to the unit; adjust the position of the remote and move closer.
Why is there no picture on my AXIL TV Receiver?
If there is no picture on your AXIL TV Receiver, it could be due to the power not being connected. Ensure you connect the power. Alternatively, the power switch might not be on; in that case, switch on the power.
How to fix 'No Signal' on my AXIL rt0420t2?
If your AXIL TV Receiver screen shows 'No Signal', ensure the DVB-T cable is properly connected by plugging it in. Also, check the aerial cable and connections for any faults.
What to do if I only hear sound but see no image on my AXIL rt0420t2 screen?
If you are getting only sound but no image on your AXIL TV Receiver, it might be because the resolution is not supported by your TV set. In this case, press the Red Color button to change the resolution. Another reason could be an incorrect connection with the AV cable, so ensure the cables are connected correctly. Finally, the program might be a radio program; press the key to switch to TV mode.
General| Brand | AXIL |
|---|---|
| Model | rt0420t2 |
| Category | TV Receiver |
| Language | English |
Details the front panel of the DVB-T2 HD receiver, identifying key components and indicators.
Describes the rear and side panel connections of the receiver, including input/output ports.
Explains the functions of each button on the remote control for operating the receiver.
Instructions on where to place the set-top box for optimal ventilation and operation.
Guides on connecting various cables for the receiver setup to TV and other devices.
Step-by-step guide on installing batteries and using the remote control effectively.
Steps to follow for powering on and starting the set-top box after initial setup.
Details the initial setup process for the receiver upon first use or factory reset.
How to access and manage program settings like favorites, lock, move, and sort channels.
Explains how to edit program preferences like fav, lock, skip, move, sort, rename, and delete channels.
Instructions for searching for TV and radio channels using automatic or manual methods.
How to perform an automatic scan for all available channels, resetting previous settings.
Guide on manually searching for channels by specifying frequency and bandwidth.
Accessing and adjusting OSD language, subtitle language, and audio language settings.
How to select the OSD (On-Screen Display) language for the user interface.
Selecting the preferred audio language for watching TV channels with multiple audio tracks.
Setting the default language for subtitles displayed during program playback.
Adjusting video and audio output settings like resolution, aspect mode, and audio output.
Configuring the receiver's date, time, and GMT offset settings for accurate operation.
Accessing system settings, including information, factory reset, and upgrades.
Viewing hardware and software information of the receiver, including model and version numbers.
How to reset the set-top box to its original factory settings, clearing all user data.
Setting timers for recording programs or for other timed functions of the receiver.
Adjusting On-Screen Display timeout duration and transparency level.
Instructions for upgrading the receiver's software via a USB flash drive.
Guide on performing Over-The-Air (OTA) software updates using terrestrial broadcast signals.
Accessing the media playback functions for music, pictures, and videos.
How to use the music playback feature to listen to audio files.
How to use the picture viewing feature to display image files.
How to use the movie playback feature to watch video files.
Managing recorded programs and files stored via the DVR functionality.
Configuring DVR settings, including timeshift functionality and recording preferences.
To Next Page
