72
5. BASIC OPERATION
5.7.5. DVR Configuration
Timeshift.
Press “Pause” key first, then at any time you can press “Play” key, the unit will start pla-
ying recorded program from the start.
Press ”Fast Forward” / “Fast Back” to move through current recording.
Note: Time shifting is only available when USB HDD is connected to system and read/
write speed is high enough to support that.
Press “Stop” key first time to end the playing mode. The unit will keep recording but
will return to current time. If you press “Pause” the playback will start again from the
beginning of the recording. Press “Stop” key again to stop the recording.
To Next Page
Loading...
