To Next PageTo Next PageHow to resolve Axis 210 problems uploading files?
If you are experiencing problems uploading files to your Axis Security Camera, it may be due to limited space. Try deleting one or more existing files to free up space.
How to fix Axis Security Camera IP address setting problems?
If you're having trouble setting the IP address on your Axis Security Camera, here are a few things to check: * If using ARP/Ping, try the installation again, ensuring the IP address is set within two minutes of powering on the camera and that the Ping length is set to 408. * If your computer and the camera are on different subnets, contact your network administrator for an appropriate IP address. * If the IP address is already in use, disconnect the camera and use the Ping command to check. If you get a reply, the address is in use; get a new one and reinstall. If it times out, check cabling and reinstall. * To avoid IP address conflicts, set the static IP address to 0.0.0.0.
What to do if Axis Security Camera cannot be accessed from a web browser?
If you cannot access your Axis Security Camera from a web browser, the IP address may have been changed by DHCP. Here's how to resolve it: 1. Move the camera to an isolated network without a DHCP server. Reset the IP address using AXIS IP Utility or ARP/Ping commands. 2. Access the unit and disable DHCP in the TCP/IP settings. Return the unit to the main network, so the unit will now use a fixed IP address. 3. Alternatively, if you need a dynamic IP address, configure IP address change notification from the network settings. Return the unit to the main network. The unit will notify you if the address changes. Also, test the network cable by connecting it to another network device and pinging that device from your workstation.
How to fix Axis 210 Security Camera when motion detection triggers unexpectedly?
If the motion detection in your Axis Security Camera triggers unexpectedly, it might be due to changes in luminance. To resolve this, lower the sensitivity setting to avoid these issues.
How to resolve Axis 210 problems setting the IP address?
If you are experiencing problems setting the IP address for your Axis Security Camera, consider the following: * When using ARP/Ping, try the installation again. Ensure the IP address is set within two minutes after powering on the camera and that the Ping length is set to 408. * If the camera is on a different subnet, contact your network administrator to obtain an appropriate IP address. * If the IP address is being used by another device, disconnect the camera, run the Ping command, and if you receive a reply, obtain a new IP address and reinstall the unit. If you see 'Request timed out,' check all cabling and reinstall the unit. * To avoid IP address conflicts, set the static IP address to 0.0.0.0.
Why is my Axis 210 Security Camera accessible locally but not externally?
If your Axis Security Camera is accessible locally but not externally, check the Internet firewall with your system administrator and verify if you need to configure the default router settings.
Why are no images displayed on the Axis Security Camera web page?
If no images are displayed on the web page of your Axis Security Camera, it could be due to a problem with AMC (Internet Explorer only). To fix this: * Enable ActiveX controls in your browser. * Make sure that the AXIS Media Control (AMC) component is installed on your workstation. If installing ActiveX components is restricted, configure your camera to use a Java applet for updating the video images under Live View Config > Layout > Default Viewer for Internet Explorer.
How to resolve Axis 210 Security Camera rolling dark bands or flickering in image?
To resolve rolling dark bands or flickering in the image of your Axis Security Camera, try adjusting the Flicker-free exposure setting under advanced image settings. Note that the 'Hold Current'/Manual setting may cause unwanted effects.
What causes poor audio quality on Axis 210A/211A Security Camera?
Poor audio quality on your Axis 210A/211A Security Camera may be caused by too many users/clients connecting to it. Try limiting the number of clients allowed to connect on the Audio Settings page.
What to do if Axis 210 Security Camera images lose focus often?
If the images from your Axis Security Camera lose focus often, disable the DC-Iris lens (AXIS 211/211A only) in the settings for Video & Image > Advanced. Focus the camera following the instructions on page 10, and then enable the DC-Iris lens.
General| Connectivity | Wired |
|---|---|
| Sensor Type | CCD |
| Resolution | 640x480 |
| Compression | Motion JPEG |
| Video Compression | Motion JPEG |
| Operating Temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Image Sensor | 1/4" CCD |
| Frame Rate | 30 fps |
| Network Interface | 10/100 Ethernet |
| Protocols | HTTP, TCP/IP, SMTP, FTP, DHCP, DNS, DDNS, RTP, RTSP, UDP, IGMP, ICMP, ARP |
| Network Protocols | HTTP, TCP/IP, SMTP, FTP, DHCP, DNS, DDNS, RTP, RTSP, UDP, IGMP, ICMP, ARP |
| Operating Humidity | 20% to 80% (non-condensing) |
