12
AXIS 213 - Installing the AXIS 213
Manual Installation using ARP and Ping in UNIX/Linux
Assign your product with a unique IP address from a computer on your network, as
follows:
1. Acquire an unused IP address for the AXIS 213 from your network
administrator.
2. Connect a standard network cable to your AXIS 213 and connect it to the
network.
3. Locate the serial number/MAC Address (S/N) found on the label on the AXIS
213.
4. Connect the power to the AXIS 213.
5. Close the ARP Ping session once ‘Reply from 192.168.0.125: ...’ (or similar) is
displayed (approximately 10-15 seconds).
6. Start a Web browser and enter the IP address in the Address/Location field.
7. Press Enter.
8. Enter a password for the root user (administrator).
9. The installation is now complete, proceed to Using the PTZ Network Camera,
on page 14.
Syntax:
arp -s <IP Address> <MAC Address> temp
ping -s 408 <IP address>
Example:
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
To Next Page
Loading...
