Axis A8105-E - 1.8 MicroSD Card Installation

Optional setup using
AXIS TA8501 Physical Tampering Switch
Page 2/2
Configure relay and tampering state in AXIS A8105-E
built-in web pages
1. To check relay state, go to:
Setup > System Options > Ports & Devices > I/O ports
2. Depending on your lock type, congure the following values for RELAY,
and click Save.
Open circuit for a fail-secure lock
Closed circuit for a fail-safe lock
3. Go to: Setup > Events > Action rules
4. Clear the checkbox for the "TAMPERING: Tilt detected" action rule.
Relay Door DoorRELAY
Name Port TypeI/O Usage Normal state is... Current Status
Open circuitOpen circuit
Open circuit
Closed circuit
TAMPERING: Tilt detected Detectors - Tilt Detection - Output Port -