Axis Camera Station - AXIS Camera Station Administration

18
AXIS Camera Station Control Buttons
View Selection
Select a view and you will get a window
showing live images direct from the camera.
It is possible to click in the image from
Pan/Tilt/Zoom cameras to move the camera
or zoom using the mouse scroll wheel.
No Live Images
Click the No Live Images button to close the
camera windows. Showing live images in the
main window uses a lot of processor power.
Not displaying live images reduces the
amount of processor power required by the
service, whilst not affecting recordings in
any way. The amount of bandwidth required
is also less when not showing live images. In
the Views section of the Administration
pages it is possible to set up the system so
that it always starts in this mode.
Select Camera
Select a camera to be shown in a new
window. Choose this if you want to close the
view windows (and thus save on processor
power) but still want a single camera view
visible on your desktop. Controls for
Pan/Tilt/Zoom, audio and AXIS Image
Enhancer may also be shown in this window.