21
AXIS Camera Station Client software
The AXIS Camera Station Client application is used for remote
operations on client workstations, where you can perform the
same tasks as from AXIS Camera Station using a similar user
interface.
Install AXIS Camera Station client software
1. From the client workstation, insert the CD and select
Software then AXIS Camera Station Client.
2. Click Open to launch the installation.
Important!
3. Next, you will be asked where to install the program. If
nothing is specified, the program is normally installed here:
C:\Program Files\Axis Communications\AXIS Camera
Station Client
You may be prompted to install .NET Framework 1.1. Simply follow the
installation Wizard’s instructions and click your way through.
You may be prompted and then automatically redirected to
http://windowsupdate.microsoft.com to locate and install these missing
Windows components:
• Windows 2000 Service Pack 4, located here:
http://www.microsoft.com/windows2000/downloads/servicepacks/
• Windows Internet Explorer 6, located here:
http://www.microsoft.com/windows/ie
Install the missing components, see your Windows documentation for
instructions. When this is done, reboot your computer and then restart the AXIS
Camera Station Client installation by clicking
AXISCameraStationClientSetup.exe on the CD.
To Next Page
Loading...
Need help?
General
