8
SOUND MENU
Sound Mode
The sound mode can be switched between
standard/music/movie/sports/user using the
/ buttons.
Custom Equaliser
The frequencies adjust the following ranges:
120Hz - Bass, 500Hz - Midbass, 1.5KHz - Midrange, 5KHz - Upper Midrange, 10KHz - Treble.
These settings can only be adjusted when the Sound Mode selection (above) is set to User.
Once this is set, press the / buttons to select the setting you would like to adjust.
Then use / buttons to increase or decrease the setting.
Balance
With the / buttons, the balance (between left & right speakers) can be adjusted.
Auto Volume (AVL)
This function, when turned on will help balance out the volume level between different A/V
sources so one is not significantly louder than the other. It can also help reduce the volume of
loud TV ads compared to TV shows. The result depends greatly on the A/V source so this
function is set to off. To turn AVL on, press / buttons to select Auto Volume and then
press ENTER.
Press / buttons to turn AVL on/off.
Surround Sound
This mode is ideal for movies and simulates multi-speaker surround sound output.
SPDIF Mode
This setting selects the output mode for the coaxial digital lead. The default setting is PCM and
this should be suitable for most amplifier connections.
AD Switch
This turns on the Audio Description function where available.
Main Speaker
This option in the Sound Menu alllows you to turn the TV’s internal speakers on or off. Press the
/ buttons to select the Main Speaker then press the / buttons to turn the Main speaker
on or off. This is a particularly useful feature in conjunction with Bluetooth operation as, for
example, if you are using a Bluetooth speaker that is outside the RV, you can turn on the Main
speaker so the TV program can be heard both inside and outside the RV.
Sound Mode
Press the ▼/▲ b uttons to select Sound Mode. Then press the ENTER button to select from a list
of sound modes. The sound mode can be switched between standard/music/movie/sports/
user using the ◄ / ► buttons.
Custom Equaliser
The frequencies adjust the following ranges: 120Hz - Bass, 500Hz - Midbass, 1.5KHz -Midrange,
5KHz - Upper Midrange, 10KHz - Treble
These settings can only be adjusted when the Sound Mode selection (above) is set to User.
Once this is set, press the ▼/▲ buttons to select the setting you would like to adjust.
Then use ◄ / ► buttons to increase or decrease the setting.
Balance
Press ▲/
▼ to select Balance and then press ENTER button to go into the Sub menu.
With the◄ / ► buttons, the balance (between left & right speakers) can be adjusted.
Auto Volume (AVL)
This function, when turned on will help balance out the volume level between different A/V sources so
one is not significantly louder than the other. It can also help reduce the volume of loud TV ads
compared to TV shows. The result depends greatly on the A/V source so this function is set default to
off. To turn AVL on, press ▼/▲ buttons to select Auto Volume and then press ENTER . Press ◄ / ►
buttons to turn AVL on/off.
Surround Sound
This mode is ideal for movies and simulates multi-speaker surround sound output.
SPDIF Mode
This setting selects the output mode for the coaxial digital lead. The default setting is PCM and this
should be suitable for most amplifier connections.
7
Sound Menu
To Next Page
Loading...
