Need help?Do you have a question about the Axis M1013 and is the answer not in the manual?
General| Maximum resolution | 800 x 600 pixels |
|---|---|
| Supported video modes | - |
| Camera shutter speed | 1/6 - 1/8000 s |
| Minimum illumination | 1.2 lx |
| Field of view (FOV) angle | 67 ° |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Optical sensor size | 1/4 \ |
| Optical zoom | - x |
| Focus adjustment | 2.0 |
| Built-in HDD | No |
| Flash memory | 128 MB |
| Internal memory | 256 MB |
| Type | IP security camera |
| Certification | EN 55022 Class B, EN 61000-3-2, n EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part\\r 15 Subpart B and C Class B, VCCI Class B, C-tick AS/NZS CISPR 22, ICES-003 Class B, KCC Class B, IEC/EN 60950-1 |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Form factor | Box |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Polycarbonate (PC) |
| Protection features | Dust resistant, Scratch resistant |
| Bundled software | VAPIX |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| DC output voltage | +5V |
| Power consumption (typical) | 2.2 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 95 mm |
|---|---|
| Width | 59 mm |
| Height | 41 mm |
| Weight | 110 g |
To Next Page
