EasyManuals Logo

Axis M1013 Quick Guide

Axis M1013
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Legal Considerations
Video and audio surveillance can be prohibited
by laws that vary from country to country. Check
the laws in your local region before using this
product for surveillance purposes. This product
includes one (1) H.264 decoder license. To pur-
chase further licenses, contact your reseller.
Trademark Acknowledgments
Apple, Boa, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, Quick-
Time, UNIX, Windows, Windows Vista and WWW
are registered trademarks of the respective
holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks
of Oracle and/or its aliates. UPnP
TM
is a
certication mark of the UPnP
TM
Implementers
Corporation.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to
fulll applicable standards for:
Radio frequency emission when installed •
according to the instructions and used in its
intended environment.
Immunity to electrical and electromagnetic •
phenomena when installed according to the in-
structions and used in its intended environment.
USA
This equipment has been tested using shielded
cables (STP) and found to comply with the limits
for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment •
and receiver.
Connect the equipment into an outlet on a •
circuit dierent from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV •
technician for help.
Canada
This Class B digital apparatus complies with
Canadian ICES-003.
Europe
This digital equipment fullls the
requirements for RF emission according
to the Class B limit of EN 55022. This
product fullls the requirements for immunity
according to EN 61000-6-1 residential,
commercial and light-industry environments. This
product fullls the requirements for immunity
according to EN 61000-6-2 industrial
environments. This product fullls the
requirements for immunity according to EN
55024 residential and commercial environments.
Australia
This digital equipment fullls the requirements
for RF emission according to the Class B limit of
AS/NZS CISPR 22.
Korea
이 기기는 가정용(B급) 전자파적합기기로서 주로 가
정에서 사용하는 것을 목적으로 하며, 모든 지역에
서 사용할 수 있습니다.
Japan
の装置は、スB 情報技術装置ですの装置は、
家庭環境で使用す目 的ていすが、
装置がジオやテレビン受信機に近接使用
受信障害を引きがあ 取扱説
明書に従い取扱いを下さい。
Safety
This product complies to EN/IEC 60950-1, Safety
of Information Technology Equipment. The power
supply used with this product shall fulll the
requirements for Safety Extra Low Voltage and
Limited Power Source according to EN/IEC/UL
60950-1.
Equipment Modications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthor-
ized equipment changes or modications will
invalidate all applicable regulatory certications
and approvals. This product is only to be used for
its intended purpose.
Liability
Every care has been taken in the preparation
of this document. Please inform your local Axis
oce of any inaccuracies or omissions. Axis
Communications AB cannot be held responsible
for any technical or typographical errors and re-
serves the right to make changes to the product
and documentation without prior notice.

Other manuals for Axis M1013

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis M1013 and is the answer not in the manual?

Axis M1013 Specifications

General IconGeneral
Maximum resolution800 x 600 pixels
Supported video modes-
Camera shutter speed1/6 - 1/8000 s
Minimum illumination1.2 lx
Field of view (FOV) angle67 °
Sensor typeCMOS
Progressive scanYes
Optical sensor size1/4 \
Optical zoom- x
Focus adjustment2.0
Built-in HDDNo
Flash memory128 MB
Internal memory256 MB
TypeIP security camera
CertificationEN 55022 Class B, EN 61000-3-2, n EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part\\r 15 Subpart B and C Class B, VCCI Class B, C-tick AS/NZS CISPR 22, ICES-003 Class B, KCC Class B, IEC/EN 60950-1
Placement supportedIndoor
Connectivity technologyWired
Form factorBox
Mounting typeCeiling/wall
Product colorWhite
Housing materialPolycarbonate (PC)
Protection featuresDust resistant, Scratch resistant
Bundled softwareVAPIX
InterfaceRJ-45
Ethernet LAN (RJ-45) ports1
Cabling technology10/100Base-T(X)
Supported network protocolsIPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
DC output voltage+5V
Power consumption (typical)2.2 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Depth95 mm
Width59 mm
Height41 mm
Weight110 g

Related product manuals