Axis M1065-LW - Using the Application in an Action Rule

AXISM1065-LWNetworkCamera
AXISVideoMotionDetection
2.ClickSmallobjects.
3.ClickEnable.
4.Clickonthe
icontoshowtheltersizeintheimage.
5.Usethemousetoadjusttheltersize.Startwithasmallsize.Movingobjectsthattinsidetherectanglewillbeignored.
Thelterdisplayedintheimagecanbemovedtomakeiteasiertocomparetheltersizewiththesizeofobjects
intheimage.Notethatthelterwillbeappliedtoallobjectsintheimage,alsotoobjectsthatarenotlocatedat
thepositionofthedisplayedlter.
6.ClickSavetoapplythelter.
7.ClickOK.
8.Usevisualconrmationtoverifythesettings.
9.Iftheresultisnotsatisfactory,increasetheltersizeinsmallsteps.
Theltersizecanalsobesetbyenteringthewidthandheightintheelds.Thewidthandheightarethemaximumwidthand
maximumheightoftheobjectstoignoreandaremeasuredinpercentoftheimagewidthandheight.Valuesbetween5and100
canbeused.
Theltersizecanalsobesetbyenteringthewidthandheightintheelds.Thewidthandheightarethemaximumwidthand
maximumheightoftheobjectstoignoreandaremeasuredinpercentoftheimagewidthandheight.Valuesbetween3and100
canbeused.
UsingtheApplicationinanActionRule
ThefollowingexampleshowshowtoconguretheAxisproducttorecordvideowhenAXISVideoMotionDetection3detectsmotion.
Usingactionrules,Axisnetworkcamerascanbeconguredto,forexample,recordvideoorsendanoticationwhen
AXISDigitalAutotrackingstartstrackingamovingobject.
ThefollowingexampleshowshowtoconguretheAxisproducttorecordvideotoanSDcardornetworksharewhen
AXISDigitalAutotrackingstartstracking.Fordetailedinformationaboutthedifferentsettings,seetheAxisproduct’sonline
helporUserManual.
1.InsertanSDcardintheAxisproduct,orgotoSetup>SystemOptions>StorageintheAxisproduct’swebpagesand
conguretheproducttouseanetworkshare.
2.Optionally,gotoSetup>Video&Audio>StreamProlesandcreateastreamproletouseforrecording.
3.GotoSetup>Events>ActionRulesandclickAddtocreateanewactionrule.
4.Congureothersettingsasrequired.Forexample,toonlyrecordvideoduringcertaintimeperiods,selectaSchedule.
5.UnderActions,selectRecordVideofromtheTypedrop-downlist.
6.Selectthestreamproleandstoragedevicetouseandcongurethepre-andpost-triggertimes.
7.MakesurethattheruleisenabledandthenclickOK.
Note
ToappearintheTriggerlist,theapplicationmustbestartedanditsstatusmustbeIdleorRunning.
Note
•ToappearintheTriggerlist,theapplicationmustbestartedanditsstatusmustberunning.
•UsetheVMD3eventifyouareusingavideomanagementsoftware(VMS)thatdoesnotsupportVideoMotionDetection4
events.TheVMD3eventtriggersthesameactionforallproles.
40