AXIS M31 Network Camera Series
Specifications
Specifications
To nd the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation.
LED Indicators
Status LED
Indication
Unlit
Connection and normal operation.
Green Shows steady green for 10 seconds for normal operation after startup completed.
Amber
Steady during startup. Flashes during rmware upgrade or reset to factory default.
Amber/Red Flashes amber/red if network connection is unavailable or lost.
Red Firmware upgrade failure.
SD card slot
NONO
NO
TICETICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your ngers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product’s webpage before removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see axis.com
Buttons
Control button
The control button is used for:
• Resetting the product to factory default settings. See How to reset to factory default settings on page 10.
• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED ashes green.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
13
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
To Next Page
Loading...
Need help?
General
