AXIS M31 Network Camera Series
How to install the camera
The device password is the primary protection for the data and services. Axis’ products do not impose a password policy as products
may be used in various types of installations, but to protect your data do the following:
• Don’t use the default password that comes with the products.
• Use a password with at least 8 characters, preferably using a password generator.
• Don’t expose the password.
• Change password at a recurring interval, at least once a year.
AXIS Internet Dynamic DNS Service
AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net
To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under
Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently
registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.
Note
AXIS Internet Dynamic DNS Service requires IPv4.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from
any location. For more information and help to nd a local AVHS Service Provider go to www.axis.com/hosting
The AVHS settings are congured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service
is enabled by default. To disable, clear the Enable AVHS box.
One-click enabled - Press and hold the product’s control button (see Product overview on page 4 ) for about 3 seconds to connect to
an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service.
If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.
Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered, the product will
stay connected to the service. This option can be used when the product is already installed and it is not convenient or possible to
use the one-click installation.
About capture modes
A capture mode consists of a resolution and the corresponding frame rate available in the product. The capture mode setting
affects the camera’s eld of view and aspect ratio.
The lower resolution capture mode is cropped out from the highest resolution.
6
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
To Next Page
Loading...
Need help?
General
