Axis M5075-G - Page 58

To Next Page

To Previous Page

AXISM5075-GPTZCamera

Learnmore

•COMMAND_CLASS_INCLUSION_CONTROLLER

•COMMAND_CLASS_INDICATOR_V3(secured)

•COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2(secured)

•COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V4(secured)

•COMMAND_CLASS_MULTI_CMD

•COMMAND_CLASS_NETWORK_MANAGEMENT_BASIC_V2(secured)

•COMMAND_CLASS_NETWORK_MANAGEMENT_INCLUSION_V4(secured)

•COMMAND_CLASS_NETWORK_MANAGEMENT_INSTALLATION_MAINTENANCE_V4(secured)

•COMMAND_CLASS_NETWORK_MANAGEMENT_PROXY_V4(secured)

•COMMAND_CLASS_NODE_PROVISIONING(secured)

•COMMAND_CLASS_POWERLEVEL(secured)

•COMMAND_CLASS_SECURITY

•COMMAND_CLASS_SECURITY_2

•COMMAND_CLASS_SUPERVISION

•COMMAND_CLASS_TIME

•COMMAND_CLASS_TRANSPORT_SERVICE_V2

•COMMAND_CLASS_VERSION_V3(secured)

•COMMAND_CLASS_ZWAVEPLUS_INFO_V2(secured)

Note

TheproductsupportsCOMMAND_CLASS_INDICATOR_V3,howeverthereisnovisibleindicator.

TurnonZ-Wave

1.GotoSystem>Z-Wave.

2.GotoGatewaysettingswirelessI/OandturnonZ-Wave.YoumayneedtowaitforafewminutesforZ-Waveto

becomeactive.

AddaZ-Wavedevice

ThoughnotlimitedbytheZ-WavePlusv2protocol,yourproduct’seventsystemallowsyoutoaddZ-Wavedevicesatanygiventime.

Ifthemaximumnumberisreached,youneedtoremoveaZ-Wavedevicebeforeyoucanaddanewone.Seetheproduct’sdatasheet

forinformationaboutmaximumnumberofZ-Wavedevices.

1.GotoSystem>Z-Wave.

2.GotoDevicemanagementandclick

Adddevice.TheproductstartslookingforZ-WavedevicesintheZ-Wavenetwork.

3.SettheZ-Wavedevicetobeaddedintoinclusion/exclusionmodeasdescribedinitsUserManual.

4.Ifrequested,enterthePINdeliveredwiththeZ-Wavedevice,andclickOK.

5.Waituntiltheaddingprocessisnalizedasindicatedbyanoticationonthewebpage.

TheaddedZ-Wavedeviceisnowvisibleinthedevicemanagementlist.

Other manuals for Axis M5075-G