Axis M5075-G - Page 59

AXISM5075-GPTZCamera
Learnmore
Note
IftheZ-Wavedeviceisnotfound,theaddingprocessisterminatedautomatically.
ToseethedetailedstatusinformationoftheaddedZ-Wavedevice,expandthedeviceinformationinthedevicemanagementlist.
Note
StatusinformationforanaddedZ-Wavedevicevariesdependingonthedevicetype.Formoreinformation,seetheonline
help
.
YoucansettheproducttotriggerruleswithspeciedZ-Wavetriggerconditions.TheavailableZ-Waveconditionsandactionsvary
dependingontheaddedZ-Wavedevicetype.
AddaZ-WavedevicewithSmartStartinclusion
YoucanaddaZ-WavedevicetotheZ-WavenetworkwithSmartStartinclusion.AZ-WavedeviceaddedtotheSmartStartlistis
automaticallyaddedtothedevicemanagementlistwithin10minutesofbeingpoweredoninthenetworkvicinity.
1.GotoSystem>Z-Wave.
2.GotoSmartStartandclick
Adddeviceinformation.
3.Typethedevicespecickeyandanyoptionalinformation.
4.ClickOK.
RemoveaZ-Wavedevicethroughinclusion/exclusionmode
Note
Thisistherecommendedremovalprocedure.
1.GotoSystem>Z-Wave.
2.GotoDevicemanagementandclick
.TheproductstartslookingforZ-WavedevicesintheZ-Wavenetwork.
3.SettheZ-Wavedevicetoberemovedintoinclusion/exclusionmodeasdescribedinitsUserManual.
4.Waituntiltheremovalprocessisnalizedasindicatedbyanoticationonthewebpage.
TheZ-Wavedeviceisnowremovedfromthedevicemanagementlist.
Note
Allproduct-relatedinformationintheremovedZ-Wavedeviceisdeleted.
Note
IftheZ-Wavedeviceisnotfound,theremovalprocessisterminatedautomatically.
RemoveaZ-Wavedevicethroughforcedprocess
Theremaybeacommunicationfail,forexampleduetodrainedbattery,soyoumaynotbeabletoremovetheZ-Wavedeviceby
settingittoinclusion/exclusionmode.YoucanperformaforcedremovalofaZ-WavedevicethatshowsthestatusDownin
thedevicemanagementlist.
1.GotoSystem>Z-Wave.
2.GotoDevicemanagementandexpandthedeviceinformationfortheZ-Wavedevicetoberemoved.
3.GotoNode>Statusandclick
.
59