EasyManuals Logo

Axis P1311 Quick Start Guide

Axis P1311
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Network Camera Devices
6 A3090-1.1 en
Maintenance and cleaning
The Axis network camera devices are maintenance free. Please note the following
when cleaning the housing:
Before cleaning, disconnect the equipment from the power supply.
Clean the housing with a soft, slightly damp (not wet!) cloth. Never use solvents,
since these could damage the labelling on the front panel and the display.
When cleaning, ensure that no liquid gets into the equipment or connections.
Remaining dangers
The scope of supply and performance of the data acquisition system covers only a
small area of measurement technology. In addition, equipment planners, installers and
operators should plan, implement and respond to the safety engineering
considerations of measurement technology in such a way as to minimize remaining
dangers. Prevailing regulations must be complied with at all times. There must be
reference to the remaining dangers connected with measurement technology. After
making settings and carrying out activities that are password-protected, you must
make sure that any controls that may be connected remain in safe condition until the
switching performance of the amplifier system has been tested.
In this manual, the following symbols are used to point out remaining dangers:
DANGER
Meaning: Maximum danger level
Warns of an imminently dangerous situation in which failure to comply with safety
requirements will result in death or serious bodily injury.
WARNING
Meaning: Dangerous situation
Warns of a potentially dangerous situation in which failure to comply with safety
requirements can result in death or serious bodily injury.
CAUTION
Meaning: Potentially dangerous situation
Warns of a potentially dangerous situation in which failure to comply with safety
requirements could result in death or serious bodily injury.
Meaning: Electrostatic sensitive devices
Devices marked with this symbol can be destroyed by electrostatic discharge. Please
observe the precautions for handling electrostatic sensitive devices.

Other manuals for Axis P1311

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Axis P1311 and is the answer not in the manual?

Axis P1311 Specifications

General IconGeneral
BrandAxis
ModelP1311
CategorySecurity Camera
LanguageEnglish

Related product manuals