Axis P1311 User Manual

34
AXIS P1311 - System Options
RTP
RTP/ MPEG-4 & H.264 - These settings are the port range, IP address, port number (video and audio), and Time-To-Live
value to use for the video stream(s) in multicast MPEG-4 and H.264 format. Only certain IP addresses and port numbers
should be used for multicast streams. For more information, please see the online help.
Bonjour
The network cameras include support for Bonjour. When enabled, the camera is automatically detected by operating systems
and clients that support this.
Storage
The Disk Management window is used to set up and manage local storage. It is used to connect memory cards for recording
video, monitoring a disk's status, enabling automatic cleanup, and preventing a memory card's memory from being
overwritten.
Storage Device - is used to identify and monitor the status of the SD card.
It shows the size of the SD card and how free
space is available for storage. It is also used to mount and format SD cards for local storage.
Device Settings - is used to configure removal of recorded video. Automatic disk cleanup
can be enabled and set up
according to a schedule, and an SD card can be locked to prevent storage removal.
Ports & Devices
I/O Ports - The pinout, interface support and the control and monitoring functions provided by this connector are described
in Unit connectors, on page 37.
LED
The Status indicator LED on the front of the camera can be set to flash at a configurable interval (or to not light up at all)
when the unit is accessed. For a listing of all LED behavior, see page 5, or the online help. Note that the LED does not flash
when the stream is retrieved using multicast
.
Maintenance
• Restart - The camera is restarted without changing any settings.
• Re
store - The unit is restarted and most current settings are reset to factory default values. The settings that do not
reset are:
• the boot protocol (DHCP or static)
•
the static IP address
• the default router
• the subnet mask
• the product interface language
• the system time
• the 802.1x settings
• Defaul
t - The default button should be used with caution. Pressing this returns the camera's settings to the factory
default values (including the IP address).
Upgrade Server - See Upgrading the firmware, on page 39.
Support
The Support Overview page provides valuable information on troubleshooting and contact information, should you require
technical assistance.

Axis P1311 Specifications

General

Brand	Axis
Model	P1311
Category	Security Camera
Language	English