ipConfigure ESM 5.1
LPR Setup and Field Installation Guide
1
ipConfigure ESM 5.1
LPR SETUP AND FIELD INSTALLATION GUIDE
Updated : February 1, 2010
This document was created to display and explain the settings and tools needed to
successfully deploy LPR for the United States Postal Service with the ipConfigure ESM
5.1 Interface. It will act as a benchmark for setup, assistance, and support. This
document is specific in camera technology (Axis P1346), Lens technology (Fujinon
8/80mm), ipConfigure ESM 5.1 build, and tools used to obtain optimal settings
(ipConfigure Thick Client LPR Console tool). The requirements of the project are run
with the following conditions expected: daylight hours, no extra light included (white or
infrared), and dawn to dusk timeframe for normal operations.
To Next Page
