Axis P1357 - Status LED for Focus Assistant; Lens Replacement Procedure

To Next Page

To Previous Page

AXISP1357NetworkCamera

HardwareOverview

StatusLEDBehaviorforFocusAssistant

Color

Indication

Green

FocusAssistantisenabled

Thelensisoptimallyadjusted

AmberThecamerahasbeenmoved,oranobjecthasbeenplacedinfrontofthelens.Exitandrestartthe

FocusAssistant.

Thelensislessoptimallyadjusted.

RedThecamerahasbeenmoved,oranobjecthasbeenplacedinfrontofthelens.Exitandrestartthe

FocusAssistant.

Thelensispoorlyadjusted.

ReplacetheLens

ItispossibletouseoptionallensesfortheAxisproduct.

Toreplacethelens:

1.Disconnecttheiriscable.

2.Unscrewthestandardlens.

3.Attachandscrewonthenewlens.

Tochangetheirisconguration:

1.GotoSetup>VideoandAudio>CameraSettings.Iriscongurationshowsthecurrentcongurediristype.

2.ClickEdit.

3.Selecttheinstalledirislensfromthedrop-downlistandclickOK.

TochangetheiriscongurationforP-irislensesnotlistedinthedrop-downlist:

1.Downloadtheiriscongurationlefromwww.axis.com

2.GotoSetup>VideoandAudio>CameraSettings.Iriscongurationshowsthecurrentcongurediristype.

3.InIrisconguration:ClickEdit.

4.GototheUploadtab.

5.ClickBrowseandselectthecongurationle.

6.ClickUpload.TheinstalledirislensshouldnowbeincludedintheIrisSelectiondrop-downlist.

7.Selecttheinstalledirislensfromthedrop-downlistandclickOK.

Note

•IfyouselectaDCiriscongurationleforaP-irislens,anerrormessagewillappearbelowtheiriscongurationtypeinthe

CameraSettingspage.ForcustomDCIrislenses,selectGenericDCIrisoption.

•Thereisnoneedtorestarttheproductafterchangingthelens.However,theproductmustberestartedifyouare

interchangingbetweenaP-iris,DC-Irisorxed/manualirislens.Inordertosetthefocusandpositionthelens,the

productmustbeconnectedtothenetwork.

Other manuals for Axis P1357