Need help?Do you have a question about the Axis P3365-V and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | - |
| Certification | EN 55022 Class B, EN 61000-6-1, EN 61000-6-2, EN 55024, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22 Class B, KCC KN22 Class B, KN24, IEC/EN/UL 60950-1, EN 50581, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-64, IEC 60068-2-78 |
| GPS (satellite) | No |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Wide Dynamic Range (WDR) | Yes |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Aluminum |
| Protection features | Vandal proof |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p, 720p |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 160 x 90, 1920 x 1080 (HD 1080) |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 160 ° |
| Angle of rotation | 340 ° |
| Camera shutter speed | 0.000028 - 2 s |
| Minimum illumination | 0.04 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/2.8 \ |
| Optical zoom | - x |
| Focus adjustment | 1.3 |
| Focal length range | 3 - 9 mm |
| Flash memory | 128 MB |
| Internal memory | 256 MB |
| Compatible memory cards | SD, SDHC |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPSc, SSL/TLSc, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Audio system | 2-way |
| Audio formats supported | AAC, ADPCM |
| Power source type | PoE |
| Power consumption (typical) | 4.2 W |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
Weight and Dimensions| Width | 148 mm |
|---|---|
| Height | 104 mm |
Details compliance with EMC directives, covering radio frequency emissions and immunity standards for various regions.
Covers product safety, battery replacement, and environmentally responsible disposal instructions.
Provides contact information for technical assistance and access to online resources like FAQs and tutorials.
Identifies physical connectors, buttons, and LED indicators on the camera unit for status and operation.
Guides on accessing the product via browser, including initial setup and IP address discovery.
Covers configuring network access from the internet and setting the initial administrator root password for security.
Details power line frequency settings and controls available on the Live View page, including manual triggers.
Explains AXIS Media Control viewer toolbar, AMC audio controls, and manual trigger configurations for video stream management.
Covers H.264 and MJPEG streaming, protocols, bandwidth, and AXIS Media Control for video delivery.
Lists various methods for accessing video streams beyond standard browser access, including different players and protocols.
Outlines methods for accessing audio streams via VAPIX, Windows Media Player, and QuickTime, detailing supported encodings.
Guides on essential initial product setup steps, including user management, network, date/time, and basic video/audio settings.
Details setting up video streams, pixel counters, image appearance, resolution, and other image-related configurations.
Explains H.264 profiles, bit rate control (VBR/CBR), and MJPEG stream optimization for image quality and bandwidth.
Covers camera settings for image appearance, white balance, wide dynamic range, and exposure adjustments for optimal image capture.
Details exposure control, shutter speed, gain adjustment, and day/night functionality for optimal image capture in various lighting conditions.
Describes defining view areas for specific crops and applying text/image overlays for information display on the video stream.
Guides on uploading, configuring transparency, and scaling overlay images, such as company logos, onto the video stream.
Covers using overlay text in action rules and setting up privacy masks to block sensitive areas of the video feed.
Details configuring audio settings, including selecting audio modes like full-duplex, half-duplex, and simplex for communication.
Covers settings for audio input, microphone selection, boost, gain control, and audio encoding formats like AAC and G.711.
Explains how to configure audio output for speakers and manage audio clips for event playback or Live View.
Guides on selecting default viewers for browsers and configuring viewer-specific settings like toolbars and decoder installations.
Explains how to add custom user-defined links and control external output devices directly from the Live View page.
Details saving preset positions, setting up guard tours, and configuring advanced PTZ controls and panel shortcuts.
Describes the PTZ control queue system that manages user access and priority for controlling camera movement.
Explains how to configure camera tampering detection and set up motion detection using include/exclude windows.
Guides on configuring motion detection windows and adjusting parameters like object size, history, and sensitivity.
Details how to set up audio detection to trigger alarms based on sound levels rising above or falling below a threshold.
Covers uploading, installing, licensing, and managing third-party applications to add functionality to the camera.
Explains how to create action rules that define triggers and actions, such as recording video on motion detection.
Guides on setting up email recipients, creating schedules, and configuring recurrences for triggering action rules.
Details how to access recorded video files, play or download them, and set up continuous video recording.
Provides instructions for installing new language files and switching the product's interface language.
Covers user access control, security settings, ONVIF integration, and protocols like HTTPS and IEEE 802.1X.
Details enabling audio support and configuring date and time settings, including synchronization with NTP servers.
Covers basic TCP/IP settings for IPv4/IPv6, DHCP, static IP assignment, and ARP/Ping for IP address acquisition.
Discusses AVHS, Dynamic DNS, and advanced TCP/IP settings like DNS configuration.
Details advanced TCP/IP configurations including domain names, NTP, host names, HTTP/HTTPS ports, and NAT traversal.
Explains network protocols like FTP, RTSP, SOCKS, and QoS settings for traffic prioritization.
Covers SNMP for network device management and RTP settings for streaming, including multicast options.
Details managing storage options, including SD card usage, network shares (NAS), and continuous recording settings.
Covers device maintenance functions like restarting, restoring factory defaults, optics calibration, and I/O port configuration.
Guides users to support resources, system overviews, logs, reports, and advanced scripting options for troubleshooting.
Explains file upload for custom settings and provides detailed steps for resetting the product to factory default settings.
Advises on checking the current firmware version and provides steps for upgrading the product's firmware.
Details emergency recovery procedures for failed upgrades and troubleshooting common IP address setting problems.
Addresses issues related to external access, router configuration, firewall settings, and problems with H.264 video streaming.
Covers troubleshooting frame rate, image quality, motion detection, and audio issues, including feedback loops.
Provides solutions for storage disruption, inability to record video, and problems mounting or using the SD card.
Lists detailed specifications for the camera sensor, lens, video compression, resolutions, frame rates, and image settings.
Details network security, system integration interfaces, casing, memory, power, and operating conditions.
Provides detailed information on the physical connectors, including the I/O terminal block and its pin assignments.
Discusses factors affecting system performance, such as image resolution, compression levels, client access, and network utilization.
To Next Page
