Need help?Do you have a question about the Axis P3364-LVE and is the answer not in the manual?
General| Model | Axis P3364-LVE |
|---|---|
| Type | Network Camera |
| Form Factor | Dome |
| Connectivity | Wired |
| Resolution | 1920 x 1080 |
| Lens | Varifocal |
| Max. Frame Rate | 30 fps |
| Day/Night Functionality | Yes |
| IR Illumination | No |
| Video Compression | H.264, Motion JPEG |
| Audio Support | Two-way audio |
| Power over Ethernet | Yes |
| Ingress Protection | IP66 |
| Impact Protection | IK10 |
| Image Sensor | Progressive Scan CMOS |
| Local Storage | SD/SDHC card slot |
| Power | PoE |
| Operating Temperature | 50 °C |
| Operating Temperature (Fahrenheit) | -4 °F to 122 °F |
Definitions for Danger, Warning, Caution, and Notice levels.
Instructions for product usage, storage, cleaning, and modifications.
Labeled diagram identifying key hardware components of the camera.
Information on power consumption, including PoE and IR illumination.
Detailed pinout and specifications for the I/O connector.
Schematic showing the wiring for the I/O connector.
Instructions for preparing the network cable and gasket for installation.
Step-by-step guide for mounting the bracket and routing cables through a wall.
Instructions for preparing the unit casing for cable routing along the wall.
Steps for routing cables along the wall and securing the unit casing.
Instructions for installing the camera unit into the casing and connecting cables.
Instructions for rotating the lens.
Instructions for tilting the lens.
Detailed steps for tilting the lens.
Guidance on adjusting focus and zoom using the web interface.
Final steps to complete the installation, including shield rotation.
Instructions for attaching the dome cover and checking focus.
Procedure for resetting the product to its factory default settings.
To Next Page
