Need help?Do you have a question about the Axis P3367–V and is the answer not in the manual?
General| Total megapixels | 5 MP |
|---|---|
| Maximum resolution | 2592 x 1944 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 1440 x 900 (WXGA+) |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 160 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/28000 - 2 s |
| Minimum illumination | 0.04 lx |
| Field of view (FOV) angle | 340 ° |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Optical sensor size | 1/3.2 \ |
| Optical zoom | - x |
| Focal length range | 2.5 - 6 mm |
| Built-in HDD | No |
| Flash memory | 512 MB |
| Internal memory | 128 MB |
| Compatible memory cards | SD, SDHC |
| LED type | IR |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | White |
| International Protection (IP) code | IP66 |
| Type | IP security camera |
| Processor model | ARTPEC-4 |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Sample rate | 16 kHz |
| Audio system | 2-way |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPS**, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| Power source type | PoE |
| Storage temperature (T-T) | -40 - 55 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 15 - 100 % |
| Operating relative humidity (H-H) | 15 - 85 % |
Weight and Dimensions| Height | 103.25 mm |
|---|---|
| Weight | 700 g |
Step-by-step guide to accessing the camera's web interface.
Guide for setting the initial administrator password for secure access.
Provides shortcuts to essential initial configuration settings like Users and TCP/IP.
Defines video stream properties including resolution, compression, and frame rate.
Manages shutter speed, gain, and iris for optimal image exposure.
Instructions for adjusting the camera's focus and zoom levels.
Configures detection and alarms for camera repositioning or lens obstruction.
Sets up detection zones and parameters to trigger alarms on movement.
Adjusts object size, history, and sensitivity for motion detection accuracy.
Lists various events that can initiate an action rule.
Lists the actions that can be performed when an event is triggered.
Guide to creating rules that link events to specific actions.
Manages user access, passwords, IP filtering, and secure connection protocols.
Configures TCP/IP, DNS, DHCP, and network services.
Restores all product settings to their original factory default values.
Step-by-step guide to updating the product's firmware to the latest version.
Troubleshooting steps for inaccessibility of the product's web interface.
Specifications covering video compression, resolution, frame rates, and streaming capabilities.
To Next Page
