Need help?Do you have a question about the Axis P3346-VE and is the answer not in the manual?
General| Model | Axis P3346-VE |
|---|---|
| Camera Type | Fixed Dome |
| Environment | Outdoor |
| Day/Night | Yes |
| Ethernet | 10BASE-T/100BASE-TX |
| Operating Temperature | -40 °C to 50 °C (-40 °F to 122 °F) |
| Sensor | Progressive scan RGB CMOS |
| Lens | Varifocal, 2.8-10 mm |
| Video Compression | H.264, Motion JPEG |
| Frame Rate | Up to 30 fps |
| Audio | Two-way audio |
| Protocols | HTTP, HTTPS, FTP, RTSP, RTP, TCP, UDP, IGMP, DHCP, DNS, UPnP, SMTP, SNMP, NTP, QoS |
| Power | PoE (IEEE 802.3af) |
Step-by-step guide to accessing the camera's interface through a browser.
Instructions for remote access and setting the initial administrator password.
Details on H.264 compression and streaming methods like RTP and RTSP.
Essential initial configuration steps for the product.
Configuring alarms for camera tampering and setting up motion detection zones.
How to obtain licenses and install third-party applications on the product.
Step-by-step guide to configuring rules for event-driven actions.
Accessing recordings and setting up continuous video capture.
Managing user roles, ONVIF, IP address filtering, and HTTPS security.
Setting up IP addresses (IPv4/IPv6), subnet masks, and ARP/Ping.
Uploading files, using Plain Config, and resetting the product to factory defaults.
Configuring network access control via 802.1X and managing digital certificates.
Assigning IP addresses via ARP/Ping, AVHS, DDNS, and advanced TCP/IP settings.
Configuring DNS, NTP, hostnames, ports, and NAT traversal for network access.
Managing SD card storage and configuring network shares for data.
Steps for checking, upgrading, and recovering firmware.
Troubleshooting IP address assignment and emergency recovery steps.
Detailed specifications for camera sensor, lens, video compression, and frame rates.
To Next Page
