Axis P3364-LVE - Route Cables Through Wall; Wall Mounting Procedure; Unit Casing Preparation

AXISP3364-LVENetworkCamera
RoutetheCablesthroughtheWall
1.Drillfourholesinthewallusingthedrilltemplate.
2.Routethenetworkcableand,ifrequired,theI/Oandaudiocablesthroughthewalland
throughtheholesinthemountingbracket.
3.Attachthemountingbrackettothewallusingfourscrewsandplugsappropriatefor
thewallmaterial.
4.Removethecameraunitfromtheunitcasingbypushingthespringsapart.
5.Removethewallgasketsfromtheunitcasing.Ifthereisonlyonecable,removeonly
onegasket.
6.Routethecablesthroughthewallholesintheunitcasing.
7.Dragthegasketsalongthecablesandplugthemintotheholes.Thegasketsshouldt
snuglyintheholeswithnofoldsorbends.
8.Attachtheunitcasingtothemountingbracketbytighteningthefourscrews.
PreparetheUnitCasing
Ifthecablesaretoberoutedalongthewall,preparetheunitcasingasfollows:
1.Removethesidelidthatisattachedtotheunitcasingbyremovingthescrew.
2.Loosenthetwoscrewsonthecableshieldanddetachthebottompart.
3.Attachthebottompartofthecableshieldtotheunitcasingwiththescrew.
3
1
2
1
Toppartofcableshield(optionalaccessory)
2
Bottompartofcableshield(optionalaccessory)
3
Unitcasing
19
ENGLISH