22
AXIS P5532/AXIS P5534 - Live View Config
Output Buttons
The output buttons are used to manually activate and inactivate output ports, for example, to switch a light on and off. To
display the output buttons on the Live View page, select the type of control to use for the port from the drop-down list:
• Pulse – Activates the output for a defined period of time
• Active/Inactive – Displays two buttons, one for each action (on/off)
The output ports must first be configured under System Options > Ports & Devices > I/O Ports, see I/O Ports, on page 38.
Note:
A multi-connector cable (available from Axis) is required when connecting I/O devices to AXIS P5532/AXIS P5534, see
Multi-Connector Cable (not included), on page 41.
To Next Page
Loading...
Need help?
General
