Axis P7214 - Audio Clips

AXIS P7214 Video Encoder
Video and Audio
For more information about these settings, please see the online help .
Audio Output
An external speaker can be connected to the Audio-out connector (a built-in amplier is required for this). The output can be
connected to another amplier with speakers. A stereo connector must be used for the audio out.
Congure the audio output settings under Video & Audio > Audio Settings.
Output gain - Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the
sound is too high, choose a lower dB.
Audio Clips
An audio clip is a sound le that can be played when events occur or directly from the Live View page. The audio clip must rst be
uploaded to the Axis product or recorded by a microphone connected to the product.
To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips. For more information see the online help
.
To congure the Axis product to play audio clips when an event occurs, an action rule must be set up. For more information, see
Events, on page 33.
Note
Audio clips cannot be used if the product’s audio functionality is enabled. The audio functionality is enabled on the Audio
tab under Video & Audio > Video Stream.
23