Need help?Do you have a question about the Axis Q7424-R MK II and is the answer not in the manual?
General| Maximum Resolution | 1920 x 1080 |
|---|---|
| Frame Rate | 30 fps |
| Product Type | Video Encoder |
| Model | Q7424-R MK II |
| Ethernet Interface | 10/100/1000 Mbps |
| Enclosure | Metal |
| Ingress Protection | IP30 |
| Video Compression | H.264, MJPEG |
| Protocols | IPv4, IPv6, HTTP, HTTPS, RTSP, RTP, UDP, IGMP, ICMP, DHCP, ARP, DNS, NTP, SNMP |
| Security | Password protection, IP address filtering, HTTPS encryption, IEEE 802.1X network access control, digest authentication |
| Connectors | RJ45 |
| Fiber Interface | SFP slot |
| Power over Ethernet | Yes |
| Humidity | 20% to 80% RH |
| Safety Certifications | CE, FCC, UL |
| Audio | Two-way audio |
| Power | PoE |
Step-by-step guide for physically installing the video encoder onto a surface or wall.
Instructions for connecting network, power, video, audio, and inserting the SD card.
Details on HTTP and RTSP ports used for viewing and configuration.
Procedure to reset the product to factory default settings using the control button.
Defines DANGER, WARNING, CAUTION, and NOTICE for hazard communication.
Safety rules for installation, operation, and maintenance.
To Next Page
