Need help?Do you have a question about the Axis Q7424-R and is the answer not in the manual?
General| Product Type | Video Encoder |
|---|---|
| Model | Q7424-R |
| Video Compression | H.264 |
| Frame Rate | 30 fps |
| Protocols | HTTP, HTTPS, IPv4, IPv6, RTSP, RTP, TCP, UDP, IGMP, RTCP, SMTP, FTP, ICMP, DHCP, ARP, DNS, NTP, SNMPv1/v2c/v3(MIB-II) |
| Edge Storage | SD/SDHC/SDXC card slot |
| Ethernet Ports | 1 |
| Fiber Ports | 1 SFP |
| Fiber Type | Multi-mode or Single-mode |
| Wavelength | Depends on SFP module |
| Max Distance | Depends on SFP module |
| Power over Ethernet | Yes (PoE+) |
| Power Input | 12 V DC |
Details the 3.0V CR2032 Lithium battery for RTC and its replacement.
Instructions for mounting the encoder and connecting cables, including power and cameras.
Step-by-step guide for assigning IP addresses using ARP/Ping commands.
To Next Page
