Axis P7214 - Page 26

AXIS P7214 Video Encoder
Live View Cong
1. Go to Setup > Live View Cong.
2. Under Output Buttons, select the type of control to use:
- Pulse activates the output for a dened period of time. The pulse time can be set from 1/100 second to 60
seconds.
- Active/Inactive displays two buttons, one or each action.
To congure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port’s Normal state.
For more information about I/O ports, see I/O Ports, on page 47.
26